Looking for:

– Microsoft Windows tai muu sovellus ei tunnista optista asemaa | Dell Suomi

Click here to Download

The DVD/CD Rom driver is typically the which is included in Windows What is wrong with the DVD/CD Rom drive? Also what computer (or motherboard). Delete the IDE ATA/ATAPI controllers from Device Manager · Create new registry keys · Check if your DVD drive is properly connected · Set your DVD. 1: Uninstall IDE ATA/ ATAPI controllers. One of the reasons why you can’t see DVD/CD-ROM in your Windows 10 PC could be faulty device drivers.


Disc/ DVD/ CD Drives Not Showing/ Missing on Windows 10/11 [SOLVED] – Driver Easy


Additionally, after you open the device’s Properties dialog box, one of the following errors is listed in the Device status area:. Windows cannot start this hardware device because its configuration information in the registry is incomplete or damaged.

Code The device is not working properly because Windows cannot load the drivers required for this device. A driver service for this device has been disabled. An alternate driver may be providing this functionality.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. Windows successfully loaded the device driver for this hardware but cannot find the hardware device. The resolutions that are listed in this article may help solve some instances but not all instances of this problem.

You may also need to contact your hardware manufacturer for assistance with your hardware. In the Search box in Control Panel , type troubleshooter, and then click Troubleshooting.

Under the Hardware and Sound item, click Configure a device. If you are prompted to enter an administrator password or provide confirmation, type the password or provide confirmation. Verify the drive is activated in the BIOS.

BIOS systems vary by device. Also, verify with the manufacturer of the computer if the drive came with it, or the manufacturer of the drive if it was purchased separately that the chipset drivers for the device are current. To update the driver, search for the driver on the device manufacturer’s website, and then follow the installation instructions on the website. To reinstall the driver, follow these steps:. Type devmgmt. If you are prompted for an administrator password or for a confirmation, type the password, or select Allow.

When you are prompted to confirm that you want to remove the device, select OK. After the computer restarts, the drivers will be automatically installed. If your problem is not solved, try the next method.

From Start , search for Device Manager. Open Device Manager from the search results, and select the View menu. Choose Show Hidden Devices. If there are additional entries, right-click them and then choose Uninstall. This problem may be caused by two Windows registry entries that have become corrupted. To use Registry Editor to delete the corrupted Registry entries, follow these steps:. Type regedit in the Run dialog box, then press Enter. In the right pane, select UpperFilters.

Note You may also see an UpperFilters. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 7. In the right pane, select LowerFilters. Note If you do not see the LowerFilters registry entry, go to the next method. Note : To use this method, you must be logged on to Windows as an administrator.

To verify that you are signed in as an administrator, bring up the Control Panel, select User Accounts , and then choose Manage User Accounts. Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur. If so, try uninstalling and reinstalling the affected app.

Check with the creator of the app to see if there is an updated version. Type regedit in the Run box, then press Enter. Right-click atapi , point to New , then select Key.

Right-click EnumDevice1 , select Modify Type 1 in the Value data box, and then select OK. To use this method, you must be logged on to Windows as an administrator. This method should be used on Windows 7, Windows 8 or 8. Important: Follow the steps in this method carefully. Windows 10 Windows 8. Method 1: Windows 7 and 8. For Windows 10, skip to Method 2.

In Windows 7 and 8. Type control in the Run dialog box, then press Enter. Restart the computer. On the Edit menu, select Delete. When you are prompted to confirm the deletion, select Yes.

Exit Registry Editor. Important: Follow the steps in this section carefully. Type Controller0, and then press Enter. Type EnumDevice1 , and then press Enter. Notes To use this method, you must be logged on to Windows as an administrator.

Need more help? Expand your skills. Get new features first. Was this information helpful? Yes No. Thank you! Any more feedback? The more you tell us the more we can help. Can you help us improve? Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped. Didn’t match my screen. Incorrect instructions. Too technical. Not enough information.

Not enough pictures. Any additional feedback? Submit feedback. Thank you for your feedback!


Leave a Reply

Your email address will not be published.